The firewood cutter in My Winter Car is essential for processing logs into usable firewood. However, many players struggle with attachment and operation. If the firewood cutter does not attach, the problem is usually the hitch lever or positioning. This guide covers everything you need to know about attaching, connecting, and using the firewood cutter correctly.
My Winter Car Tips: 7 Essential Secrets The Game Won’t Tell You (2026) Table of Contents
Key Takeaways:
- The My Winter Car firewood cutter is located at the woodshed and cannot be purchased
- Lower the rear hitch lever inside the Kekmet before attaching the firewood cutter
- Position the Kekmet very close to the firewood cutter for successful connection
- Engage the PTO lever to power the firewood cutter saw and conveyor system
- Higher engine RPM increases the firewood cutter speed
- Attach a trailer behind the firewood cutter to collect processed wood automatically
- Most firewood cutter attachment failures come from incorrect hitch position or poor alignment
- The My Winter Car firewood cutter requires patience — the system is intentionally finicky
How To Attach The Firewood Cutter
The firewood cutter must be connected to the Kekmet tractor before it can operate. Follow these steps for proper attachment.
First, drive the Kekmet in reverse and position it very close to the firewood cutter. Alignment needs to be precise or the connection will fail.
Next, go inside the Kekmet cabin and locate the rear hitch lever. This lever is positioned at the rear section of the tractor interior. Pull it to lower the attachment arms.
After lowering the hitch, exit the Kekmet and approach the firewood cutter. Click on the connection point to attach it. If it does not connect, reposition the Kekmet slightly and try again.
My Winter Car Alcoholism Cure: Complete Problem Bar Guide How To Connect The PTO
The firewood cutter requires power from the Kekmet to function. This power comes through the PTO system.
Inside the Kekmet, locate the PTO lever. It sits to the left of the steering wheel, opposite the hand throttle.
Engage the PTO lever to activate the drive shaft. This powers the circular saw and conveyor belt on the firewood cutter.
For faster cutting, increase the engine RPM using the hand throttle. Higher RPM means quicker log processing.
Octopath Traveler 0 Beginner’s Guide: 15 Essential Tricks to Survive the Grind How To Use The Firewood Cutter
Once the firewood cutter is attached and the PTO is engaged, you can start processing logs.
Collect logs from the nearby wood pile. Carry each log to the firewood cutter and place it into the feeding slot.
The circular saw splits the log into two smaller pieces. These pieces move along the conveyor belt automatically.
Attach a trailer behind the firewood cutter to collect the processed firewood. Without a trailer, the firewood falls onto the ground.
Continue feeding logs until you have enough firewood for heating your home.
Where Winds Meet Qinghe Cat: Complete Location Guide Common Problems And Fixes
Many players experience issues with the firewood cutter. Here are the most common problems and how to fix them.
Firewood cutter not attaching: The rear hitch is not lowered. Go inside the Kekmet and pull the hitch lever before attempting to connect.
Cutter not running: The PTO is not engaged. Locate the PTO lever inside the Kekmet and activate it.
Connection keeps failing: The Kekmet is too far from the cutter. Reverse closer and align more precisely.
Cutting speed is slow: Engine RPM is too low. Increase throttle to speed up the saw and conveyor.
Take your time with positioning. The attachment system in My Winter Car is intentionally finicky and requires patience.
My Winter Car Jobs Guide: How To Fund Your Project Without Starving To Death (2026) Safety And Handling Notes
The firewood cutter can behave unpredictably if handled incorrectly.
When you increase RPM suddenly, the cutter may shift or move. This can break the connection or cause misalignment.
If the hand throttle pushes the machine forward, reduce RPM immediately and reposition the Kekmet.
Avoid rushing the attachment process. Quick movements often cause the connection to pop loose, forcing you to start over.
Where Winds Meet Romance Guide: Yes, You Can Get Married, and Yes, It’s Actually Worth It Final Blurb
The firewood cutter in My Winter Car works reliably once you understand the process. Lower the rear hitch first, position the Kekmet carefully, then attach the cutter manually. Engage the PTO lever to power the machine and feed logs steadily into the slot. Patience is key — rush the process and the machine fights back.
How to Fix DXGI_ERROR_DEVICE_HUNG in ARC Raiders Conclusion
The My Winter Car firewood cutter is essential for processing logs and heating your home during winter. Attachment can frustrate new players, but the process becomes simple once you understand it. Always lower the rear hitch first, align the Kekmet precisely, and engage the PTO before feeding logs into the firewood cutter. Avoid rushing and adjust positioning as needed. Once you master the My Winter Car firewood cutter, keeping your home warm becomes effortless.
Stop Building Like A Noob: Advanced Tactics To Break ‘Alchemy Factory’ FAQs About My Winter Car Firewood Cutter
Where is the firewood cutter in My Winter Car?
The firewood cutter is located at the woodshed near your home.
Why will the firewood cutter not attach?
The rear hitch lever is not lowered or the Kekmet is not aligned properly with the cutter.
How do I start the firewood cutter?
Engage the PTO lever inside the Kekmet cabin after attaching the cutter.
Does engine speed affect cutting?
Yes. Higher RPM increases the cutting and conveyor speed significantly.
Can I buy the firewood cutter?
No. The firewood cutter is not purchasable. It is found at the woodshed from the start of the game.
Arc Raiders Traitor: Spotting Backstabbers Before They Strike 
